“SPI-to-LCD adaptor High speed with dual in-line LCD connector” has been added to your basket. View basket
-
- Development Boards, Hobby, Lab and IT, Maker, Musical
AMP XPT8871 5WATT AUDIO
- £2.05 excl. VAT
- This board offers a 5 watt class D inductorless audio amplifier.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker
Arduino Mega/Due multi-IO adaptor
- £40.00 excl. VAT
- This board offers the ability to drive a variety of peripheral devices from an Arduino Mega or Due (family) board. It offers many interface options.
- Add to basket
-
- Out of Stock
- Development Boards, Hobby, Lab and IT, Maker
Arduino PRO MINI Industrial Module
- £40.00 excl. VAT
- This is a DIN rail microcontroller module with 16 HINIL 24 volt inputs and outputs using an Arduino Pro-Mini. It can provide the intelligence for a small industrial machine or act as a peripheral for a larger Din-rail controller.
- Read more
-
-
- Development Boards, Hobby, Lab and IT, Maker
Arduino UNO solder prototyping board
- £2.20 excl. VAT
- This is a small adaptor board allowing soldered-in components to be added to an Arduino UNO.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker
DC 4-9V Drive Stepper Motor Screw With Nut Slider 2 Phase 4 Wire
- £9.80 excl. VAT
- This offers the ability to move a small shuttle precisely from a Raspberry PI (or other) microcontroller.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
DIN HV PSU
- £41.00 excl. VAT
- This unit is a high voltage 340VDC max adjustable DIN rail power supply.
- Add to basket
-
- DIP Adaptors, Industrial
DIP Adaptor 2SSOP8 To DIP14
- £2.00 excl. VAT
- Allows two SSOP 8pin smt devices to be mounted into perf board etc on a 0.1" pitch. (priced per pack of 5)
- Add to basket
-
- Development Boards, Industrial
Explorer 16 Microchip PIC Development board
- £40.00 excl. VAT
- Arizona Microchip 16 bit processor development board
- Add to basket
-
- Out of Stock
- Components, Development Boards, Industrial, Microcontrollers
ICD3 programmer/debugger
- £99.00 excl. VAT
- The DV164035 is an MPLAB ICD-3 in-circuit debugger.
- Read more
-
-
- Out of Stock
- Development Boards, Hobby, Lab and IT, Maker
IIC-to-LCD adaptor High speed with dual in-line LCD connector
- £2.20 excl. VAT
- This is a small adaptor board allowing an LCD to be driven from the fast serial 2 wire inter-IC bus.This means it can be used with an Arduino, Raspberry Pi or other microcontroller board.
- Read more
-
-
- Development Boards, Hobby, Lab and IT, Maker
IIC-to-LCD adaptor High speed with in-line LCD connector
- £2.20 excl. VAT
- This is a small adaptor board allowing an LCD to be driven from the fast serial 2 wire inter-IC bus.This means it can be used with an Arduino, Raspberry Pi or other microcontroller board.
- Add to basket
-
- Out of Stock
- Development Boards, Industrial
PICDEM 1.1 GP Development board
- £25.00 excl. VAT
- The DM300014 Development Board from Microchip.
- Read more
-
-
- Out of Stock
- Development Boards, Industrial
Picdem 2 Plus Microchip PIC Development board
- £35.00 excl. VAT
- Arizona Microchip 16 bit processor development board
- Read more
-
-
- Out of Stock
- Development Boards, Industrial
PICKIT 44pin Demo Board
- £15.00 excl. VAT
- The DM164120-2 from Microchip.
- Read more
-
-
- Development Boards, Hobby, Lab and IT, Maker
Plastic Enclosure, Wall Mount, Polycarbonate, 235 mm, 185 mm, 119 mm, IP65
- £20.00 excl. VAT
- This is an industrial wall-mountable case that already has card slot channels and may be used to house Din-rail devices.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU ME2108 0.4 amp boost regulator
- £1.50 excl. VAT
- This board offers a 0.4 amp boost (step-up) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU MP1484 3 amp buck regulator
- £4.20 excl. VAT
- This board offers a 3 amp buck (step-down) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU MT3608 2 amp boost regulator
- £1.74 excl. VAT
- This board offers a 2 amp boost (step-up) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU NCP3063 0.1 amp inverting regulator
- £7.80 excl. VAT
- This board offers a 0.1 amp boost-invert point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU NCP3063 0.35 amp boost regulator
- £8.43 excl. VAT
- This board offers a 0.35 amp buck point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU NCP3063 0.8 amp buck regulator
- £5.19 excl. VAT
- This board offers a 0.8 amp buck point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU RIPPLEKILL FILTER
- £1.50 excl. VAT
- This board offers additional low-pass noise filtering to the output of a point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU RT8462 LED CHAIN 0.4 amp boost regulator
- £3.20 excl. VAT
- This board offers a 0.4 amp boost (step-up) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU TPMP1470 2 amp buck regulator
- £4.20 excl. VAT
- This board offers a 2 amp buck (step-down) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU XL1513 2 amp buck regulator
- £4.00 excl. VAT
- This board offers a 2 amp buck (step-down) point-of-load switch-mode regulator.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker, Power
PSU XL6007 +-15V 1.5amp boost regulator
- £5.28 excl. VAT
- This board offers a 1.5 amp boost (step-up) point-of-load switch-mode regulator with +15V and -15V outputs.
- Add to basket
-
- Out of Stock
- Development Boards, Hobby, Lab and IT, Maker
Raspberry PI 8 input/ 8 mains relay adaptor board
- £40.00 excl. VAT
- This board offers the ability to drive 8 mains 12 amp relays and read 8 industrial inputs or switches from a Raspberry PI (or other) microcontroller.
- Read more
-
-
- Development Boards, Hobby, Lab and IT, Maker
Raspberry PI Pico run/stop button
- £1.00 excl. VAT
- This board offers the option to halt the Raspberry PI-PICO single board computer by adding a RUN/STOP button.
- Add to basket
-
- Hobby, Development Boards, Lab and IT, Maker
SPI-to-LCD adaptor High speed with dual in-line LCD connector
- £1.90 excl. VAT
- This is a small adaptor board allowing an LCD to be driven from the fast serial 4 wire SPI bus. This means it can be used with an Arduino, Raspberry Pi or other microcontroller board.
- Add to basket
-
- Development Boards, Hobby, Lab and IT, Maker
SPI-to-LCD adaptor High speed with in-line LCD connector
- £1.90 excl. VAT
- This is a small adaptor board allowing an LCD to be driven from the fast serial 4 wire SPI bus.This means it can be used with an Arduino, Raspberry Pi or other microcontroller board.
- Add to basket
